Utah On Target

Drain Cleaning & Repairs

For all your drain cleaning services, Utah on target is always the best choice.

Request a Free Quote


Utah on Target is the best drain cleaning services with 23 years of experience. We are always ready to help you get the best plumbing services for all your kitchen and bathroom needs.



We had water problems of a very long time and during a get together my friend recommended me Utah on Target, I took a consultation from them for my plumbing issues and they explained to me about the various things that they can check for my water problems and Thanks to them I have no plumbing issues.

Kathryn J. Cahill

I have had drainage and plumbing issues and it was generally me who used to fix it, but I decided on finally getting a professional look at the reason why I have drainage problems. This when I contacted Utah on Target and with their help, I understood the reasons for my drainage issue and they help fix them.

Robert L. McCann


Water Tank Fitting

Water tank fitting is one the main issue of people having water problems when it comes to good fixing and better solutions for any water issues we are the best.

Pipe Leakage Repairing

If you have a thin strain of water coming out of you, tap it is more than likely it is a pipe leakage problem. How do we know this? Because we are experts in the field of plumbing.

Sewerage Issues

Sewerage issue is the dirty work that nobody wants to clean, but we can help you with it. We with the help of our machines can help you clean the mess that might have caused.

Water Tank Cleaning

Water tank cleaning is one of our favorites, we make sure that the water you are being supplied are clean and regularly cleaning your water tank will ensure the same.

Pipes Fitting

Pipe fitting is like a puzzle; it takes an expert to know what pipe fits where. We Know! And we can make it easier for you to access the water in the right way.

Leak Detection and Repair

As we said before, it takes an expert to understand if there is a leak in the pipe and to understand what measures need to be taken to keep everything in place. Contact us and get to know more.












Plumbing Tips and Tricks

  1. Evacuate Clogs Without Chemicals

Next time your channel is clearing gradually, do not purchase expensive, compound channel cleaners. Physically unclog a drain with a channel wind.  If you don’t have or don’t have any desire to issue with one, have a go at using a wet/dry shop vacuum to suck out the stop up.


  1. Use Heat to Loosen Tough Water Pipe Fitting

Solidified fittings can make it about difficult to move the fitting with pristine quality. You may almost certainly apply warmth to slacken up old, hardened pipe dope. A little amount of propane light will work, yet you will need to apply heat for a couple of minutes before much work can be done. Use heat-safe material to ensure adjacent dividers. It might appear glaringly evident, yet just warmth on metal water funnels, never on or alongside gas channels, and not on the plastic channels or fittings.

  1. Check Your Showerhead for Issues

String tape is one of the most straightforward approaches to fix a dribbling showerhead. Odds are, the hole implies the strings are not associating firmly. Unscrew the showerhead, apply the new tape by enveloping by a clockwise bearing, and re-join to stop the trickle. If the showerhead is stopped upwards, absorb it a bowl with warm water and vinegar for 60 minutes. Use a little brush to release any mineral stores that could be causing blockages in the splash.

  1. Disregard Thread Sealing Compounds—Use Thread Tape

String fixing compound, generally called “pipe dope,” can be a trickle and spread. For most DIY ventures, including channel strings around the house, string tape will work similarly also or better. You can purchase a multi-reason tape, which usually is white. The thicker tape is typically yellow for gas or pink for water — attempt one of the thicker choices for more straightforward dealing with. When you wrap the tape, move the tape counterclockwise around the strings.


  1. Try not to Be Afraid to Replace Parts Inside Your Toilet or Faucet.

Dismantling channels under your sink or shower can prompt muddled issues on the off chance that you commit an error. In any case, there’s next to no you can harm by attempting to supplant your can’s flapper or your fixture’s cartridge. Worn flappers are a typical reason for breaks between the latrine tank and bowl. What’s more, they just cost a couple of dollars! As a little something extra, the bundle accompanies simple to adhere to guidelines for substitution. Most present-day fixtures can be fixed by supplanting the whole inside with another cartridge. This necessitates you evacuate a screw or two. Along these lines, if you hear the latrine running every now and again, or your sink is dribbling, get new parts and give it a go.


Please Feel Free to Call Us

If you have any plumbing issues big or small, contact us and get a free consultation about your plumbing or drainage issues.

Scroll to top